S6 Dow Chemical Synthetic Lubricant

Contact Us


With 5 years effort,
Fortune global 500 Dow Chemical developed screw air compresor innovated lubricant.
UconTM Air Compressor Lubricant S-6 is based on the PAG oil of Dow Chemical with other lubricants advantages to develop reliable
and compatible aynthetic oil.
Ac S-6 lubricant is free of macro-molecule during running.Then carbon deposit coking will be decreased.

Restrain coking and carbon deposit

Dow Chemical S6 compressor synthetic lubricant
is special fluid, it can effectively restrain and removve precipitate
to protect the machine well. Then it will avoid coking and
carbon deposit during running.


Longer service life

The air release property of S6 synthetic
lubricant is less than one minute, which will
decrease the contact time & area with air. Then
it will improve the machine heat and lubrication
efficiency to avoid hhigh temperature oxidation


Lower maintance cost

  • Cooler
- Increase cooling efficiency
- Prolong lubricant service life
- Restrain lubricant temperature increase
- Decrease cooling loading & air consumption
  • Air end screw
- Increase screw lubrication efficiency
- Decrease screw film enery consumption
  • Air oil separator
​- Prolong separator service life
- Decrease separator block & high pressure drop

Typical Property

Test item Test method S-6
Appearance Visualization Limpidness
Viscosity at 40°C ASTM D445 45.82
Viscosity at 100°C ASTM D445 7.64
Viscosity index ASTM D2270 133
Pour point °C ASTM D97 -35
Flash Point (COC), °C ASTM D92 245
Water Separation Properties ASTM D1401 10
Acid number , mg KOH/g ASTM D664 0.13
Bubble properties 93.5°C ASTM D892 5/0
Density g/ml, 25°C ASTM D941 0.856



 Inquiry - S6 Dow Chemical Synthetic Lubricant